NAPS-02 corresponds to various data communication cards, LAN cards, and the modem cards.
By inserting the card, all of configuration necessary for connecting the Internet is done automatically, so everyone also who doesn't know much about computers can provide wireless LAN service easily. Of course, various customizing is available by Web interface.

On firmware 1.0-207b, we added an initial configuration of W01K (AU),but removed initial configuration file of MC-P300. Even if this information file removed, still you can use this card by your reconfiguration .

On firmware 1.0-205, we added an initial configuration of AH-S405C (DDI Pocket)

On firmware 1.0-203, we added an initial configuration of AH-H403C (DDI Pocket), but removed initial configuration files of CFE-02, DopaMax2881P, and C081NDB. If their information files removed, still you can use those cards by your reconfiguration .

Data communication card | LAN card | Modem card

The following data communication card (*) corresponds to router NAPS-02.
(* "Data communication card" indicates the one that the wireless telecommunication feature is equipped on the card itself.)

The configuration of the typical card are set to NAPS-02 beforehand. The default is as shown in the table below ("Guest account" of the Internet service provider is set). Because the dial-up connection number, the connection method, etc. are automatically selected with the inserted card, the customer doesn't required set the configuration by the computer. It is fit in the demand "Anyway, anyhow, connect to the Internet soon". Configuration on the other providers can be set from Web for maintenance.

[NOTE: NAPS-02 does not correspond to P-in Memory.]

Communication service name (Telcos, Kinds)	Card name	Maximum speed	Internet Service Provider	Username/password (guest account)	Remarks
b-mobile (Japan communication, PHS)	BMH10-J BMH10C-J	200kbps	b-mobile	bmobile/bmobile	200kbps is a Virtual speed when compression proxy of Japan communication is used.
Air-H" (DDI pocket, PHS)	AH-G10 AH-H401C AH-N401C AH-H403C AH-S405C	128kbps	PRIN	prin/prin	Possible to correspond to other providers by the maintenance web. NAPS-02 does not correspond to P-in Free 1P, and P-in Free 2PWL, so that NAPS-02 may cause the damage of these cards. Never connect these with NAPS-02.
	CFE-02(*1)	32kbps
	MC-P300(*1)
DoPa (NTT DoCoMo, PDC)	DoPaMAX 2881P(*1)	22.8kbps	Mopera	(blank)/(blank)
@FreeD (NTT Docomo‚PHS)	P-in Free 1S	64kbps
FOMA (NTT DoCoMo, CDMA)	P2401	384kbps
CdmaOne (KDDI, CDMA)	CDMA 1X WIN W01K(*2)	600kbps(*3)	AU.NET	au@au-net.ne.jp/au
	Rapira C315SK	64kbps
	C081NDB (with your mobile phone)(*1)	14.4kbps
Eo64 air (K-opticom, PHS)	MA-N1	64kbps	There is no default because the guest account does not exist.		Confirmed the operation. (18 Sep. 2002)
	MA-N2				Confirmed the operation. (18 Sep. 2002) Please use the PC card adaptor of a standard appending for MA-N2.

(*1) These cards' initial setteing information was removed, but you can use these cards by your reconfiguration. (23 Oct 2003)
(*2)If you're connected between NAPS-02 to your PC by using Ethernet wire, cannot use NAPS-02. (But wireless connection is no problem.)
(*3)W01K(CDMA 1X WIN Card) using on NAPS-02,effective rate are 600kbps, wheras Direct-connection between Windows PC and W02K has around 700kbps. NAPS-02 has About 85% speed than Direct-connection. (Remark: AU 's official CDMA 1X WIN rate are 2.4Mbps.)

The following LAN card corresponds to router (NAPS-02) only for a cool spot. It becomes LAN connection mode common even if only LAN card inserts which card.
The card which has been described here is the one of the operation verification ending. Please contact our company when the card which has not been described and there is a card of the operation hope.

(attention: The following, such shape with the media cable.

The all-in-one design (with built-in LAN connector) is such shape. )

The following modem card corresponds to router NAPS-02. Initialization is not done, so please set it by yourself.

The card which has been described here is the one of the operation verification ending. Please contact our company when the card which has not been described and there is a card of the operation hope.

It is not possible to verify it to the connection to the provider though the following card confirms even recognition on NAPS-02 because there is no system requirements in our company. Please acknowledge it.

(confirmed with NOKIA's GPRS card. Please contact us for details.)